Have you been thinking of how to remove conifers around your home? Or do you have plans for raising structures where there’re a lot of conifer trees? How much does conifer tree removal cost?
This article will be a solution to your problems.
We’ll be looking at conifer tree removal methods and costs. You’ll soon find out if you don’t know how much it will cost you.
Introduction To Conifer Tree Removal & Costs
Tree removal is a risky procedure that needs to be handled professionally.
This is especially true when the tree to be removed is significant. Conifer trees can be medium-sized, while there are huge ones. The name says a lot about the category they belong to. Conifer trees are simply those with cones.
Trees within this category include cedar trees, juniper trees, cypress trees, pine trees, yew trees, blue spruce, balsam fir, eastern hemlock, and giant sequoia, among others.
You’ll typically incur removal costs if you hire professionals to remove these trees safely.
A variety of removal methods are available for conifer trees.
There’s the traditional felling technique, chain saws, and the chemical removal method. Also, conifer trees can be removed by climbing and chopping off the limbs or branches and other trunk segments.
You may use the bucket removal method for structurally faulty or weak trees. Here, a cherry picker or bucket truck lifts workers to get as close as possible to where you will cut the tree.
The Crane tree removal method is another mainly used for high-risk situations. This pulls out the tree from the ground and hauls it off.
Is There Any Need For Conifer Removal?
Yes! You may want to remove these trees for some reason.
It could be for your benefit or for people around you, as the case might be. Removal of conifer trees could result in damaging structures and safety or blocking the penetration of light.
They can also attract pests to homes and surrounding areas.
Damage to structures
This tree can easily cause damage to the foundation of houses and other structures around. The conifer tree is characterized by its overall root system. This can be a severe problem for neighboring buildings or properties.
How does it happen? The lateral growth of their root systems causes instability to nearby structures.
When these trees are infected with a disease, they can decay and fall at anytime. This situation could be a pending disaster for you and the people around you.
Block penetration of light
Conifer trees are beautiful when growing up. As soon as they mature, they block reasonable amounts of light rays in homes and gardens. These trees grow very fast. Their heights can reach up to 100 feet.
Hence, restricting visual looks can cause problems within the neighborhood.
Invite pests to the surrounding
Rotten trees are a result of decay due to pest activity. Such neglect further attracts more pests. If such trees are near your home, your house stands to be the next target for pest infestation.
Different Conifer Removal methods
You can employ several methods of removal based on the one that best suits your needs.
Some people only cut down trees and leave stumps behind. In contrast, others remove both the tree and stumps. Sometimes it’s risky leaving stumps behind.
You can equally poison the tree and allow it to rot. It depends on which one you want to do. Without further delay, let’s look at how you can remove a conifer tree successfully.
Physical Conifer Removal Method
This method involves cutting down the tree using machines alongside other tools.
After successfully cutting down the tree, you decide whether to leave stumps behind or not. But you can equally remove the stumps.
Here are some steps that are taken to carry out this job.
It’s imperative to prepare ahead of time. Removing a conifer tree isn’t something you’ll wake up any time to do.
You prepare your chainsaw, pruning tools, and other tree removal equipment. Doing so will not only make it easy for you but safe as well.
Decide the direction for the tree to fall.
You’ll need to consider some factors when deciding where you want the tree to land. Look out for significant obstacles.
Such obstacles include overhead lines, proximity to roads, and buildings. In cases where people are within, you put a notice or warning signal across the working area. Study the branches to know which approach to use.
Knowing the wind direction matters a lot. Clear a working area at least about 45 degrees all around the tree to have a free functional space. This prevents putting any passerby at risk.
Cut the trunk down
After clearing the area, this is what you’ll do next.
Ensure your chainsaw has enough gas to last you for the session. Climb the tree using rope or any means of your choice and cut down all branches and twigs.
This will create a free space when falling down the tree. It would be best if you used a pulling chain for pruning branches.
Select any cutting technique to use
This is the time you bring down the tree. It’s important to note two things before taking this action. There should be uniform thickness within the hinge using the correct dimensions.
Secondly, insert a felling wedge before the tree pinches the guide bar.
The technique depends on the tree’s size, slope, and chainsaw use.
Look for possible infestation.
This is very key when removing a conifer tree. When the tree begins to turn brown, it’s a sign of disease infection.
You’ll need to be careful during the removal process. You might have weakened the branches and trunk due to infestation.
Removing Conifer Stumps
After cutting down the conifer tree, the stump will be leftover from the plant.
You decide to remove it or not. If you think it’s dangerous, you should uproot or grind it. This is to avoid putting you or anyone at risk.
Follow the procedures below to complete your removal process.
Use grinder for removal
Grounding the stump out when the roots are deep would be best.
Using this heavy machine will make your work faster. The device is specially designed for stump removal.
Make sure you wear safety clothing and follow the ethics of doing the job accordingly.
Set fire to consume stumps
Before continuing with this method, you’ll need to dig out the stump.
Before setting the fire, you’ll need to allow the stump to dry before burning it. You can also keep the stump burning in the middle of the heat.
This is considered the best way to use the burning method.
Chemical Methods Of Conifer Tree Removal
This is another fantastic method of removing the conifer tree.
To carry out this method successfully, you’ll need to cut off large branches using a chainsaw. Cut a portion around the circumference of the trunk below the lower limbs. This process is known as frilling.
Expose the inner tissue by leaving strips of bark connected to the conifer tree.
Mix your chemicals according to instructions from the manual and pour them into a spray bottle. Apply the chemicals into the conifer tree until the whole surface is wet.
Allow the conifer for several weeks to die off. You will notice its effect when the leaves and trunk begin to turn brown. After the conifer dies, you cut through the truck using a chainsaw to bring down the tree.
Remove the stump after that if you want to. But you should remove it, to avoid pests from visiting the area.
This method is very effective as it deals with the tree down to its roots.
Cost of Conifer Tree Removal
The cost of conifer tree removal has a lot to do with their sizes.
These trees mostly grow to heights of around 15 to 120 feet high. Taller trees have wider trunks which means more work cutting the trees.
Also, there must be enough clearance for such trees to fall without causing any damage.
The cost of removing these trees ranges between $500 and $4,500.
This is quite a wide variance, better explained by the following; the removal cost for conifer trees can be categorized into three groups based on tree size.
Because these trees are medium to extra large, their removal costs vary accordingly.
For medium-sized conifer trees measuring about 15 to 25 feet, expect a removal fee of $500 to $900. Those measuring more than 25 to 60 feet high are considered large conifer trees.
Having these removed will cost anywhere from $900 to $2,500.
Conifer trees are known to grow to great heights. An example is the giant sequoia tree. This extends to heights of about 60 to 120 feet or more.
You should expect a $2,500 to $4,500 removal fee, like an extra-large tree. Sometimes, removal prices may go beyond this limit.
UK Conifer Tree Removal Cost
The cost of paying a laborer for conifer tree removal is around €200. The average removal cost is €500. Some factors can affect its price.
These include the number of conifers to remove, the height of trees as well the road network.
Other factors include your locations around the UK and where to dispose of wood and greenery. The average price for tree felling ranges from €75-€1,200, depending on the height.
For debris disposal €50-€150, wood chipper €50-€300 daily, and for survey €200-€300. Remember that these prices don’t include VAT.
Factors Affecting Conifer Tree Removal Cost
When it comes to conifer tree removal costs, you’ll need to consider several factors.
Apart from its size, which generally plays a considerable role in determining costs, other factors include the tree’s condition and location.
The presence or absence of obstacles may also influence conifer tree removal prices.
What more? The removal cost of these trees may be determined by the time of year and the number of branches it has. Tree stability is another factor that you may consider.
There’s also the equipment being used for such a procedure. Deploying specialized equipment for such a job may cost more.
We’ve discussed the role played by size in determining conifer tree removal costs.
As expected, medium-sized conifer trees will cost less to remove than large ones. Similarly, extra-large trees will incur much higher removal costs than large conifer trees.
Here, the tree height, as well as the thickness of its trunk, is mainly considered. Taller conifer trees mostly have thicker trunks and vice versa.
The decision to remove a conifer tree may be influenced by its condition.
Such a tree may be diseased, could be damaged by a storm, or maybe dead. Whatever the condition is, these types of conifer tree removal jobs are usually risky to deal with.
Such risks are reflected in the prices based on the tree’s current condition. Removal costs could start from around $1 890.
Accessibility is a crucial cost-determining factor for conifer tree removal.
Is the tree accessible enough, or are there obstacles that require maneuvering around? A tree conifer overhanging your home will be riskier to remove than one in an open space.
Such risks will reflect removal costs.
With obstacles, a careful and more calculated approach is adopted. This mostly takes more time than regular conifer tree removal jobs.
Time of Year
Peak periods for conifer tree removal start from spring to the end of summer. During this time, tree removal services are most busy, with removal costs increasing more than in off-peak periods.
You’ll have to weigh your options regarding the budget required and whether such removal needs are urgent or can be postponed.
Number of Branches
Fully mature conifer trees mostly range from large to extra large. Although there are medium-sized conifer trees, these eventually grow beyond their current sizes.
Conifer trees are considered oversized and extra-large, typically with large branches. There could be several of these growing at different points on the trunk.
The more branches, the higher your removal cost is likely. Sometimes, such branches will have to be cut off before the leading truck is felled to limit the likelihood of damage.
When removing diseased or damaged conifer trees, an assessment of the tree to know its level of stability becomes necessary. A less stable tree will require proper rigging to ensure it goes down in a certain way when cut.
You will factor all of these into the cost of removal.
Type of Equipment
Different types of equipment and tools are used for conifer tree removal.
Those located around densely populated areas will likely pose more risks to public property when removed. The use of cranes for such removal jobs tends to be the most reliable option.
A tree removal service will mostly charge you higher for using a crane for such removal.
With these cost details and cost influencing factors, you should have a better idea of conifer tree removal costs. Also, you get to make informed decisions on how to proceed.
The above information has shown you the two effective methods of conifer tree removal. The solution is now in your palms.