Tree Cabling Kit: Supplies And Equipment

Tree cabling technology came into play in the early 1900s. It was an ideal solution for tree felling, especially for trees that held historic significance.

Of course, tree cabling cannot be possible without certain equipment, which is why this article, I’ll be talking about tree cabling kit, supplies, and equipment.


Tree fellers realized that steel-made wires tied around branches could be useful in keeping trees from falling or leaning when under pressure from winds. They also realized that can could help the trees grow upright.

Over the years, tree cabling has become a popular means forestry experts use in preventing tree leaning. This technology helps ensure the safety of structures and persons from potential tree failing.

Since the Advent of tree cabling, the materials used in making tree cables have not changed. It has remained pretty much the same.

Be warned, tree support systems are not meant to hold dying trees together, neither are they a safety guarantee in the event of a very heavy storm.

How long does cable last?

Tree cables are made of very strong materials and they can last for as long as 50 years. However, within this time frame, the tree may have outgrown the mechanical advantage that the cables provide.

A period of 10 years is when the cables will be most useful. After that, it is advised to cable the trees again.

Brands Of Tree Ties Cables – Recommended

There are various brands and models of tree cables. I’d like to recommend a few below.

Habitech 45′ Tree Tie Strap Staking and Guying Material

This tree tie strap is so a table for trees that are up to 45 feet tall. It is made of very soft woven material, but it is very strong.

It can be used to lend extra support to the branches and trunks of large trees. It is also suitable for younger trees, thanks to its texture.

When it comes to the prevention or repair of tree damage due to heavy winds or storms, this is a great tree strap to work with.

Many horticulturists and gardeners, and landscapers trust this tree strap for several tree cabling applications. It can be cut down to different lengths to suit both large and small trees.

This tree strap has a natural color olive color so it blends right into any natural setting.

If you’re looking for a cable that will securely brace a large or small tree without causing any damages to it, then you should consider this high-strength, 1,800 tensile tree cable.

It is made from long-lasting materials and can withstand all sorts of weather conditions, including rain, snow, and heavy winds.

This non-abrasive tree tie is much safer and effective than wires of conventional ropes. It is also very wide, so it won’t constrict the tree’s growth.

The edges of this tree tie are soft and round by design, so it won’t damage the tree bark, yet it is durable enough not to snap under pressure. This makes it an excellent alternative to a tree stake or tree guying kit.

One of the biggest upsides of this can is that it is very easy to tie around the tree and any stake or ground anchor support. The tree support strap is capable of firmly holding arbor knots and there is no chance of it sliding down the trunk of the tree.

Versatility is one of the strong points of this tree cable, besides being able to handle heavy-duty tree applications, it can also be used as a substitute for standard ropes used for surfboard tie-down straps, plant ties, tents, trellis making, and other DIY applications.

Dimex EasyFlex Plastic Locking Tree, Plant, And Cable

This can tie can be used to secure both young and mature garden trees. It was designed mainly for garden use and smaller trees.

The package includes a 100-foot roll of locking ties which are 0.5 inches wide. The materials are also eco friendly, as they were made from recycled plastic materials.

This tree tie is very easy to use, all you have to do is trim it to your preferred length, fasten it around the tree limb or branch, and secure it to a ground anchor.

The tree tie isn’t just meant for landscaping alone, it is also a reusable alternative to zip ties. It is ideal for keeping holiday lights properly bundled.

This tree tie was built using soft flex technology, which provides a gentle means by which you can see the young trees in your garden. You can secure your trees to stakes without fear of it snapping or the trees growing into the bark.

All you need to is follow the simple instructions and fasten it correctly.

Ground Anchor Kits

Ground anchor kits are a very important part of tree cabling and stability. A properly installed ground anchor will hold one end of the cable securely and help keep the tree in an upright position.

There are many brands of ground anchor kits and I’d like to recommend a few.

Gray Bunny Ground Anchor Kits

The gray bunny ground anchor kits are ideal for securing trees that are planted in open spaces which may be vulnerable to heavy winds. They are not just suitable for anchoring down trees alone, they can also be used to secure other framed structures like tents, carports, cabins, travel trailers, chicken coops, and small buildings.

They also work well with children’s swing sets, deer stands, camping tents, and other forms of temporary shelters.

This top-quality anchor kit comes with 8 large heavy-duty anchors that are 15 inches long. The solid steel shaft has a diameter of 3/8 (9.5mm), also 3 inch wide helixes which offer you the best in holding ability.

It has 360-degree welds in-between the spiral helix and the shaft, which are durable and can be installed firmly into the ground. This industrial-grade hardware id built for fastening large trees as well as other temporary structures.

These ground anchors are user friendly, as they can be easily installed. You don’t need to be a professional arborist to be able to use these anchors.

They have very sharp and pointed tips that allow for easy piercing into the ground. It also has a metal torque bar that offers very good leverage for driving the anchor into the ground without the need for too much force or a drill.

Another good feature of these ground anchors is that they come with extra accessories such as the carrying sack that makes transportation very convenient. The rubber edged guards for anchor pilot ends allow you to safely store away the anchor pins when you no longer need them.

It also comes with a rugged 25-foot nylon material rope, which can be looped through the eyelets and securely fastened to your tree.

Gray bunny is known for producing top-of-the-range anchors for your tree structure, both in the garden and out in the open.

The manufacturers also offer a one-year money-back guarantee.

The Tree Guy Anchor Kit

The tree guy anchor kit is another ideal product for holding trees firmly. They come already assembled and they are easy to install.

They are very rugged and they can easily be driven into the ground. They are built for securing trees that are less than 3 inches in caliper.

This patented arrow anchor includes 3 complete assemblies. They are made of the toughest nylon materials and can are driven into the ground with a 4-foot length ½ inch pipe that gives you the very best of holding power.

The kit also comes with 12-foot tree tie webbing guy lines which are ¾ inches wide and are made of non-stretch woven polypropylene fabric. They come in a natural olive green color so they blend very well into natural settings.

It also has a spring-loaded cam-lock length and a tension adjuster.

DeepRoot Arbortie Heavy Duty Anchor Kit

These heavy-duty anchors are perfect for anchoring trees that are up to 6 inches in caliper. The anchors are reusable and can securely hold larger trees and help keep them upright.

They are also very economical, as they are not as expensive as other anchors of this quality.

This heavy-duty anchor kit comes with three 30 inch long arbor ties and 3 steel anchors than can guy trees that up to 6 inches in caliper.

Installation Of Tree Cabling Kits

Although most tree cabling equipment is easy to use and install, it is always best to hire a professional and qualified arborist to do the job.

On a domestic level, that is if you’re planning to can smaller garden trees no more than 12 to 18 feet tall, then you may attempt climbing and cabling the tree yourself.

But for very tall trees between 20 to 30 feet tall, climbing up and doing the installations yourself may be dangerous, especially if you have little experience.


I trust this article on tree cabling kits and supplies has been informative.

Thanks for reading!

Leave a Comment

Your email address will not be published. Required fields are marked *