Several cases have been reported of ground sinking where trees were removed.

What’s the cause of that, and how can it be addressed? We’ll be discussing this condition and its causes. If you have such a problem, you’ll find tips on how to handle it.

Let’s proceed to find out.

Ground Sinking Where Tree Was Removed

There are various reasons for tree removal, ranging from landscaping needs, dead trees, pest activity, precariously bending, and excessive shedding.

Removal follows multiple techniques which may include felling, stump grinding, or stump removal. How the job site is managed after completion will determine what happens.

  • Does Tree Removal Method Matter?

While seeking answers to causes of ground sinking where trees are removed, you may be tempted to link such occurrence with the tree removal method used.

Having removed the tree, what’s left behind is the stump. To get rid of it, stump grinding may be preferred by some.

In other cases, stump removal may be adopted. The difference between the two is the level of invasiveness of the procedure.

Stump grinding is the least invasive technique as it only focuses on the visible stump section above ground level. Grinding levels it down until it’s flush with the ground.

Stump removal on the other hand requires digging out the stump and root systems attached to it. This is an invasive approach as it’s likely to have huge openings where the roots previously sat.

So, does the tree removal method determine whether you’ll observe ground sinking or not? Not exactly! Both strategies mentioned above resulted in a sinking ground where you removed the tree.

Why is that so? This takes us to the next section, where we find real answers.

Why Ground Sinking is observed where Tree is removed

The ready answer to why ground sinking is observed where tree was removed is settling.

Settling is the primary reason why you find depressions around areas where trees were uprooted. Another reason for that is root rot.

During stump grinding, the focus is mainly on the stump.

Here, the roots are left to remain buried and steadily decompose over several decades. With complete decomposition, it’s not uncommon to notice depressions around such areas.

This may not be as common as the former.

Proper Filling of Holes is needed.

The hole where a tree was removed or uprooted will require proper filling. For more giant trees, such spots will take up a lot of space.

Now filling up such holes isn’t as easy as many think. It’s not done haphazard as it goes beyond piling up dirt until it is level with the ground.

Following this route will only lead to settling as mentioned earlier. You’ll need to be more cautious about what must be included when filling the hole.

Also, this needs to be done systematically and patiently. Any planting or growing vegetation around the area must wait until the ground can hold up.

  • Clear the Hole of all Debris

To avoid ground sinking where tree was removed, you’ll need to start by clearing the hole of all forms of debris. It would help if you were more attentive to leftover roots and wood debris waste.

So why is the clearing of wood debris important? It is because these could quickly decompose.

They can hardly hold up and cause the ground to sink when they do. The more wood debris added to the pit or hole, the more likely the earth will sink rapidly.

That is why you need to exclude all debris to ensure only suitable material is used to fill the hole where the tree was removed.

  • Fill with the Right Material

One of the ways to reduce ground sinking when you remove a tree is by having it filled with suitable material. Different kinds of material will hold up and limit the level of ground sinking.

You can go for gravel mixed with dirt or combine such with large stones.

Even after filling with such material, patience is crucial as you’ll need to wait for the dirt to settle before adding more ground.

The waiting time may last anywhere from a few days to a few weeks. Frequently observe the area until you can determine that it will hold up.

  • You can Grow your Plants Over the Area.

Having postponed growing vegetation over the previously depressed area, such a site is now ready to be used. Because the correct materials have been combined with dirt to fill it up, it can now hold up.

You can grow your landscaping vegetation, trees, or whatever you wish.

  • Ask the Pros if you have any Doubts.

You might have doubts about what exactly to do about sinking ground within your yard. Under such circumstances, you’ll do well to contact or hire a professional to carry out the procedure.

Here, you don’t need to stress out over what needs to be done.

All you have to do is point the way. And allow the pro to handle the job. Of course this will cost you a fee which is totally worth it as your yard is fixed.

A better way of going about this is by having the tree service fix the area immediately after performing the job.

Here, the cost of filling up the hole is included in the price quote. You’ll need to discuss with the professional about your needs long before the job is performed.

This ensures that every cost detail is looked at and included in the estimates.

  • Always Have Holes Covered

It’s essential always to be cautious about the safety of your surroundings. This will require properly closing any holes where trees are removed from.

This action helps eliminate injury risks and tripping hazards. You won’t want to have your kids exposed to any dangers due to negligence on your part.

Ground sinking where you removed a tree is familiar, primarily due to settling. When this is observed, there’s a need to ensure that the hole is filled with suitable material.

Plus, you’ll need to also wait to add some more dirt when such depression is observed.

Leave a Reply

Your email address will not be published. Required fields are marked *